sugestions on how to strut springs
1 - 2 of 2 Posts
Joined
·
23,902 Posts
:thumbsup
Keep in mind that the autozone strut compressors aren't always the best. I rented a pair and the threads were stripped, that was an accident waiting to happen. You're also supposed to grease the threads to make them turn easier. It also helps prevent wear.
Keep in mind that the autozone strut compressors aren't always the best. I rented a pair and the threads were stripped, that was an accident waiting to happen. You're also supposed to grease the threads to make them turn easier. It also helps prevent wear.
1 - 2 of 2 Posts
Join the discussion
Recommended Reading
-
Error 01282 Need ECM pinout for ALH mk4 1999
VW Mk4 Jetta, Golf, New Beetle, Passat TDI forum1999 NB ALH TDI build date 9/98 Car started throwing CEL light once in a while and when it did the power would decrease until I turned off the car and restarted. SInce then when I start the car no check engine light for about one minute, then the check engine light appears. I have replaced the...- 0
- 45
-
EGR blanking plate on a Golf Plus 1.9 DPF TDI (engine code BLS)
VW Mk4 Jetta, Golf, New Beetle, Passat TDI forumHello, I own a VW Golf Plus 1.9 TDI and 77 KW (105 PS) 2006 with DPF. At 178000 km I would like to fit an EGR blanking plate into the Golf Plus. First question: Is that possible without limp mode? If yes, which size do I have to buy and where should I put it in as easy as possible? Greets...- 4
- 774
-
MAF question
VW Mk4 Jetta, Golf, New Beetle, Passat TDI forumI have a 2004 passat tdi with a manual trans, egr delete and stage 2 tune that I bought non running. It is now running but loses power above 2000 rpm. The car has no codes, I recorded a log file and one thing I noticed is mass air flow requested is always at 1000, actual will change between...- 4
- 238
-
Ext290 · updated
-
If you want to install whell spacers, look at here please.
VW Mk4 Jetta, Golf, New Beetle, Passat TDI forumThe common understanding of installing a wheel spacer on a car is to install a metal disc on the wheel hub and then install the wheel (of course, the wheel is fixed on the wheel spacer), thereby increasing the coaxial wheelbase of the vehicle. In theory, the longer the car's wheelbase, the lower...- 2
- 150
-
Kwok · updated
-
wont go over 20 mph
VW Mk4 Jetta, Golf, New Beetle, Passat TDI forumhello all, i am purchasing a 2001 new beetle and it has a new turbo system and intake installed. the problem is that after about 10 minutes of running, you can hear a flap closed type sound and the car won't go over 20 mph. turn it off and let sit for awhile and runs good for about 10 more...- 3
- 362
-
ddtm · updated
Join now to ask and comment!