Price Increase???
1 - 2 of 2 Posts
Joined
·
23,902 Posts
There was a price increase for calendar year 2010. I forget how much it was but that sounds about right. Current pricing are in the buying guide/FAQ/checklists. I'm going off what's on VW's site. The price on the VW website includes the $750 delivery fee.
1 - 2 of 2 Posts
Join the discussion
Recommended Reading
-
2014 VW Jetta TDI lost AC refrigerant
VW Mk6 Golf, Jetta, Beetle, Sportwagen TDI forumHi everyone, I was wondering if this is a common issue. Went to my mechanic to diagnose loss of cold air, he tried to recover the refrigerant and there was almost none left (only 0.06 lb was recovered). The pressure on both low and high pressure lines was good both before and after recovery...- 1
- 33
-
Condenser
VW Mk6 Golf, Jetta, Beetle, Sportwagen TDI forumHey guys, looking for some info on what all is needed to be removed to get down to the condenser to replace on an mk6 CJAA Sportwagen. Haven’t found enough solid info on it so I figured I’d try here, the only YouTube video I found that was close was a petrol Jetta but it wasn’t the same.- 1
- 82
-
shagginwagen · updated
-
Changing the CJAA Timing Belt Without Removing the Motor Mount
VW Mk6 Golf, Jetta, Beetle, Sportwagen TDI forumI have a 2011 VW Jetta Sportwagen TDI (CJAA). I recently changed the timing belt and found there are two methods. One suggests the removal of the engine mount and the other does not. When changing the timing belt in this car without removing the engine mount there is very limited space to...- 1
- 125
-
Jay Miller · updated
-
Brake Bleeding Procedure for 2013 Jetta
VW Mk6 Golf, Jetta, Beetle, Sportwagen TDI forumI recently installed a brake master cylinder on a 2013 Jetta and ended up getting air into the system. I bled the system the conventional way, but could not get a good pedal---could only get a good pedal after pumping the pedal twice, indicating that there was still air in the system. After...- 1
- 150
-
Codes P0341 and P00C6
VW Mk6 Golf, Jetta, Beetle, Sportwagen TDI forumHi Everyone, I took my cylinder head off to remove a snapped injector clamp bolt. Whilst at it, I changed the fuel filter. I removed vacuum pump and only loosen the cam pulley to help take the cylinder head off. I have used a vacuum extractor to purge air out of the system. Tried starting and...- 1
- 180
-
Willowdiy · updated
Join now to ask and comment!