Joined
·
23,902 Posts
It was brought to my attention that some pics may not work in firefox. I'm not sure why, forum/site gremlins. I will fix it later, if you note any broken links/pictures, please make a post so I can try to fix them.
pics not working in firefox
1 - 3 of 3 Posts
1 - 3 of 3 Posts
Join the discussion
Recommended Reading
-
Golf mk3 1997 ADZ 1.8 PETROL AUTO ..THAILAND
VW Mk3 Jetta, Passat TDI and other/older dieselsHello I am down to my last chipped key and have immo problem No LT pulse. No fire Can someome advice. I have iimo errors vcds but cant interpret. Get immo bypass ? Change reader ring? Reprogram key? Local dealer useles- 1
- 94
-
Squire243 · updated
-
Whining gearbox
VW Mk3 Jetta, Passat TDI and other/older dieselsHi, hope your all well. I have 2004 Passat TDi 1.9 sport. Had it now for almost 10 years. It’s been a fantastic car and very reliable. It’s done just over 150,000 miles now and it just developed a winning noise when decelerating. When I push the clutch in it disappears. Ive done bit of research...- 1
- 388
-
Large Oil leak into intake
VW Mk3 Jetta, Passat TDI and other/older dieselsSo I'm fairly certain one of two things has happened to my TDI. Either the turbo blew or the head gasket. Was driving tonight speeding up, nothing crazy. I lost power. Was still going at 60 just stopped accelerating. Felt a pop then smoke started pouring out of the exhaust. I was less than a...- 1
- 360
-
Junglejim · updated
-
problems with vacuum lines....
VW Mk3 Jetta, Passat TDI and other/older dieselsplease,i have much problems with vacuum lines on my afn golf 3,it is 110 hp,and i dont have vacuum line diagram...car was crashed,and after that nobody can fix the vacuum lines because nobody knows how to do that....thanks....- 0
- 343
-
ivancro · updated
-
AAZ Injection Timing Issues
VW Mk3 Jetta, Passat TDI and other/older dieselsI have an AAZ that's always been a little sluggish. I'd been driving it with the cold start lever constantly pulled out because it would stall otherwise. This lead me to believe the timing was too retarded. When I checked it, it was at 0.73mm, which is within the "check range" but I decided to...- 1
- 317
Join now to ask and comment!