I have a 2001 Jetta bought it with no keys, had one made and the car starts for 1 second and then dies. I have vag com but no skc. I was hoping I can disable the immobilizer and save a trip to the dealer. Please email or call me [email protected] 773-319-0003. My name is Rob. Thank you.
new member with 2001 Jetta
1 - 3 of 3 Posts
Joined
·
23,902 Posts
Sure you can bypass it but you have to get the SKC. More info is in the FAQ section.
1 - 3 of 3 Posts
Join the discussion
Recommended Reading
-
Better fuel mileage and power
New TDI forum member introductionsGood Afternoon Gentlemen I have a 2006 VW Jetta TDI 1.9 BRM with the DSG automatic trans. I am up to date with preventative maintenance on the vehicle even with 259k on the original engine and trans. My question for you gentlemen, is this model capable of advancement for better fuel mileage...- 2
- 101
-
Skanderbeg35 · updated
-
New member intro
New TDI forum member introductionsHi All, I’m new to the forum. I have had various TDI cars and have done servicing and minor repairs myself over the year. We currently have a 2011 Touran. Looking forward to learn and contribute on here- 1
- 366
-
Willowdiy · updated
-
New member. 02 golf tdi original owner
New TDI forum member introductionsLow boost. I removed the turbo and replaced the actuator and cartridge. I identified some problems with these parts. The cartridge came with the stop screw not set. Should I preload the actuator arm by 1 or 2 turns? Also, is the stop screw set based on a specific clearance in the veins or...- 1
- 108
-
New membert
New TDI forum member introductionsJust wanted to say hi, I have a 2004 passat tdi wagon with a manual trans, been a heavy equipment mechanic for years, first vw diesel that I have owned.- 1
- 139
-
Ext290 · updated
-
Still no access to Premium Member priviledges!
New TDI forum member introductionsHere is my obligatory New Member post in the correct thread. When can I expect to be able to access the '06 BRM timing belt- enhanced part 2 and/or part3? This is the sole reason i joined, to get access to the write-ups with torque specs. Also, no way that I have found to turn off the auto...- 3
- 190
Join now to ask and comment!