new engine break in techniques
- Status
1 - 2 of 2 Posts
Joined
·
23,902 Posts
Closing and moving to general diesel tech disc because I want everyone to see this.
1 - 2 of 2 Posts
- Status
Join the discussion
Recommended Reading
-
limp mode on 2,0 tdi 2013 transporter
General Diesel DiscussionI change engine , code the injector , i use a used engine with 40000km on. The problem i have now is that only get 2800 omdr.No fault code , no lamp on. I get a used turbo with the engine so i put on. i heard a wisled noise , if i take of the vacum on the solenoid the noise get away. But get...- 2
- 84
-
senjamann · updated
-
Which model(s) do you drive?
General Diesel DiscussionHi guys. Now I've been curious for a while as to which is the most popular model users have on here. In a poll you can only have 10 options so I've added the popular models talked about on here, sorry if I missed your model but you can add a comment saying which model it is. If you have more...- 75
- 26K
-
Keithuk · updated
-
VW T5 2004 1.9TDI goes into limp mode at 60mph every single time
General Diesel Discussionhi, the scanner readout suggests "boost pressure fault". no lights on dash. so far the garage has 1. cleaned the turbo 2.new MAF 3.checked high pressure/vacuum pipes 4. changed N75 5. cleaned EGR valve i am at a loss now, has anybody got any suggestions what to do next ? if i stay under 60mph...- 1
- 62
-
zephania · updated
-
Poor cold start idle and acceleration problems
General Diesel DiscussionHello, guys! I've got a 1.9 TDI, 130HP (PD) and I've noticed some serious stuttering at cold start. It idles at around 980 RPM with revs bouncing, after a few kilometers, revs drop down to normal - 903 and it gets a little smoother but I still feel some of this stuttering upon acceleration, also...- 1
- 129
-
ShunASZ · updated
-
Free EOBD II Error Codes software
General Diesel DiscussionHi guys/gals. 5 years ago when I had my Golf GTD I printed out all 110 pages of data from AD for the Golf 2.0 TDI 2009 because that was the closest vehicle to mine. All the error codes printed out and it took an hour and a half 140 sheets, slow network printer. Some of you my know I make...- 156
- 672K
-
Keithuk · updated
Join now to ask and comment!