VW TDI forum, Audi, Porsche, and Chevy Cruze Diesel forum banner

141 - 145 of 145 Posts

·
Registered
Joined
·
11 Posts
Just to be sure if i download and use this disc is there a chance it could mess up the setup i currently have? I would really like to be able to play a DVD while driving but not at the expense of messing up my radio?? I have a 2013 Passat SEL Premium.
 

·
Registered
Joined
·
1 Posts
I found some info on another VW navigation board on how to do this but it's been deleted by the mods. So here is a summary and clearly explained article on how to unlock the RNS510 VIM video in motion (TV free) dvd player capability. This previously cost about $150 US for the plug-in box and here is all the info you need for free. The donation button is at the bottom of the forum page if this saved you some money. As of the last edit, this is reported to work on all part numbers of the RNS-510 including Touareg versions. First, here is some background:

1. The RNS-510 DVD player will stop playing video faster around 5 mph. This is for safety's sake. There are dvd players in many minivans and it's the responsibility of an adult to decide if they want to enable this on their car and when to use this capability. Make sure to remove this feature before you sell the car to a third party. If you do not agree to the Terms of Service Agreement legal disclaimer stop reading and leave the website.

2. There are hardware devices that will get allow video in motion. They do something to the speed signal which can also change how the GPS works when the GPS signal is lost (like when in a tunnel). This is because the car uses sensor input to determine position when the GPS signal is lost. These are also expensive.

3. There are many RNS-510 hardware versions and firmware versions. This script will work across multiple versions. Most people report success but a few have reported failure. So far, nobody has reported a frozen unit but it's possible whenever you edit the firmware. DO NOT do this hack if you're not willing to eat a $1800 mistake for the trade off of getting VIM dvd in motion capability. And of course, myturbodiesel.com is not responsible for anything that YOU do out of your own free will to hack your car. I am not providing the script and did not write it, another website did. There are too many versions and combinations for me to know if it'll work on your car since there could be an unknown difference so please post if it works for you or not, your RNS510 hardware and firmware versions, and model/year. I have no way of verifying if posters are telling the truth so again, do this at your own risk.

There are software methods to enable VIM but you must use the Continental service tool which is very expensive and not easily obtainable. Continental is the company that makes the RNS-510.

The way to get VIM yourself is the same idea behind how the Continental tool does it - by changing a value in an internal chip to cut the dvd player at 255 mph instead of 5 mph. This basically raises the limit at which the DVD player will cut off. This is not a firmware flash, it's a script that hacks the RNS-510 and changes this value.

Burn a CD with the iso (cd image file) that contains the script. Some people report that they have to press and hold the eject, day/night, and guide buttons (try it first without doing this reboot). Immediately insert the CD and release the buttons. The video demo below shows just inserting the CD and that's it. Let it run. It may reboot a few times, just let it run. When done, it will display an OK message. Even though some people have reported an OK message, it hasn't worked for them.

So here is the site where you can download the iso file. US RNS-510 Video In Motion — Robpol86.com The file you want to download is "RECODE VIM Berto89.zip" at the bottom. Extract it. Burn the image file "VIM_Berto89.iso" inside the zip file to a blank CD. The slower speed, the better. There are many free iso burning programs out there and most branded computers come with them. Then insert the CD as described above and shown in the video below. If you wish to revert the changes, use the other iso in the zip file to run the restore script. If your unit really does become frozen, try doing the reset procedure. If it's still frozen, you were warned!

Here is a demo:

I have a first version RNS510 and I've tried it a million different ways, it won't work on mine. It just says CD/DVD error.

Total time was about 3 minutes. Your results may vary.
That's great. I'll try that on my wife's car. For my BMW I had to pay almost €150 to download it from Unlock your Car's DVD and Update Your Car's Navigation Map , but they don't have update for VW.
 
141 - 145 of 145 Posts
Top