Hi, welcometomyturbodies
I usually do it carefully with a metal scraper, just be sure to keep it flat and straight so it doesn't dig in but if it isn't to stuck you might get it with a stiff piece of plastic. I then give it a clean with a bit of petrol or something similar on a clean rag. You can put something in the bores to catch any crud. The main thing is to take your time and go carefully. Also here's a faq for removal.
http://www.myturbodiesel.com/1000q/a4/cylinder-head-removal-ALH-TDI-engine.htm
I usually do it carefully with a metal scraper, just be sure to keep it flat and straight so it doesn't dig in but if it isn't to stuck you might get it with a stiff piece of plastic. I then give it a clean with a bit of petrol or something similar on a clean rag. You can put something in the bores to catch any crud. The main thing is to take your time and go carefully. Also here's a faq for removal.
http://www.myturbodiesel.com/1000q/a4/cylinder-head-removal-ALH-TDI-engine.htm
