[chittychittybangbang]

This should also apply to the VW Jetta TDI. A Ross tech VCDS cable and software is required. Long story short, adjust channel 13 in the CECM adaptation. While you're in there you can also set it to all doors open with one press of the unlock button or unlock the doors when you pull the key out of the ignition.

Here is the full article and screenshots:

http://www.myturbodiesel.com/1000q/a6/change-number-blinks-turn-signal-vw.htm

 

[chittychittybangbang]

Hey, this issue has been driving me crazy -- I bought a cable from Rosstech in large part because I wanted to change the # of flashes to 5 on my 2011 Golf TDI.

I think I found a solution though -- see here: http://forums.vwvortex.com/showthre...signals-count-in-MKVI&p=70054737#post70054737

Tell me if this works for you guys.

Please try it and lets us know if it works This step is not clear:

3. At the prompt "Set to factory settings for lights & vision?", select OK.

4. Marvel in amazement as the turn signal magically flashes 1, 2, 4, or 5 (yes 5) times.

 

[chittychittybangbang]

Great! The writeup to include this note for the 2011 models has been added. Also used the pic you posted on the vortex, is that OK?