VW TDI forum, Audi, Porsche, and Chevy Cruze Diesel forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter · #3 ·
Update

I found it easiest to remove the tensioner and re-install it at the same time as the belt..

After I installed the belt and set the proper tension, I rotated the crankshaft through 2 rotations and re-set it to the TDC per Haynes manual...the camshaft seems to be slightly off from the indicator (two teeth)....should I remove the timing belt and adjust the camshaft??

Thanks!
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top