Just replaced torque converter in my 01 jetta and forgot to use anything to keep power to ecm while it was off the battery. Now car will not not do anything, is there anyway to reboot the ecm without having to use some kind of programmer?
ECM reboot
1 - 3 of 3 Posts
Joined
·
5,942 Posts
I think that's in the how to index and faq at the top of the page.
Joined
·
15 Posts
If you have VCDS clear the codes with the key in the ON position then turn the key off the should clear the hard codes.
1 - 3 of 3 Posts
Join the discussion
Recommended Reading
-
2000 Jetta Alh immobilizer won't work
VW Mk4 Jetta, Golf, New Beetle, Passat TDI forumHey .I recently bought a Jetta and the key was broke when I bought it .I would have to but the key into the fob and and start the ignition.I bought a new fob and swap o over the immobilizer and circuit board and now it only starts for a second then cuts out .I would appreciate any guidance .- 1
- 46
-
2000 jetta · updated
-
AC pressure randomly too high??
VW Mk4 Jetta, Golf, New Beetle, Passat TDI forumAC working fine last summer. Blower motor resistor went out this spring. Flipped it today and it works enough to test the AC. (Since the AC doesn't turn on at Fan speed 4). Fears confirmed no cold at all. Got a DIY refill can with the pressure gauge and refill hose. However the pressure reads in...- 2
- 103
-
1999.5 golf TDI idles but that's it!
VW Mk4 Jetta, Golf, New Beetle, Passat TDI forumI have a 1999.5 Golf TDI which has sat for quite a few years due to a very slight head gasket leak of compression into cooling system - after I drove it home from San Antonio to Houston some 200 miles I notice a bit of coolant coming out of the overflow on way home and when I asked the PO about...- 4
- 160
-
Gas to diesel swap
VW Mk4 Jetta, Golf, New Beetle, Passat TDI forumWondering what I’m up against. Taking a gas Jetta and replacing it with a diesel- 1
- 104
-
If you want to install whell spacers, look at here please.
VW Mk4 Jetta, Golf, New Beetle, Passat TDI forumThe common understanding of installing a wheel spacer on a car is to install a metal disc on the wheel hub and then install the wheel (of course, the wheel is fixed on the wheel spacer), thereby increasing the coaxial wheelbase of the vehicle. In theory, the longer the car's wheelbase, the lower...- 3
- 258
-
Kwok · updated
Join now to ask and comment!