VW TDI forum, Audi, Porsche, and Chevy Cruze Diesel forum banner

1 - 2 of 2 Posts

·
Premium Member
Joined
·
12 Posts
Discussion Starter #1 (Edited by Moderator)
Hi,
I am still in process to try read codes from ECM, but so far no luck.
Can anybody please post me 16 PIN Connector diagram to try
compare with my. I have on car like this:
Pin1=black+white strip
Pin2=0
Pin3=0
Pin4=orange
Pin5=orange
Pin6=0
Pin7=Gray+white strip
Pin8,9,10,11,12=0
Pin13=green+white
Pin14,15=0
Pin16=red+white
I have voltage of 12.6V on pin1,pin7=12.17V,and pin 16=12.7V.
I use few different scanners and I was unable to read codes from this car.
Check engine lights came on after 20 seconds of engine running.

Any tips???

And picture of connector:
http://img852.imageshack.us/i/connector.jpg/



Maybe this will help.
Thank you,
 
1 - 2 of 2 Posts
Top