[Wheeler97]

Hi, getting 00741 code, brake lights are working.

 

[Keithuk]

VAG Error Code: 00741

Fault Location:
Stop lamp switch/Brake pedal position (BPP) switch - signal correlation

Possible Cause:
Wiring.
Both switch positions not synchronised.
Stop lamp switch.
Brake pedal position (BPP) switch.

As taken from my http://www.myturbodiesel.com/forum/f9/free-eobd-ii-error-codes-software-2919/

 

[Wheeler97]

Well, the brake light switch is working becouse brake lights work. How to check brake pedal position switch?

Found this: ‒ → Carry out resistance measurement between switch contacts using hand multimeter V.A.G 1526.
Specification:
Brake pedal not depressed: less than 10 ω
Brake pedal depressed:∞ω

I get: 0.00 to ∞ from the pedal position switch
∞ to 0.00 from brake light switch

 

[Wheeler97]

I took ou the switch and disassembled it, everything looks fine. Also I get about 11v at the connector. Tried driving without the switch, but it gave out the same error.

 

[Giova]

Hello Friends, I'll hope you doing well,


This time my wife's car present a couple fault codes 2 Faults Found:

17811 - EGR System: Regulation Divergence
P1403 - 35-10 - - - Intermittent
00741 - Brake Pedal Monitoring
27-00 - Implausible Signal

Could U help me to solve it. I don't have Idea why the light of warmer plugs blink and doesn't turn off.

Thanks for the help.

Giova