Cold start solenoid
Remebered to see my injector pump physical timing on my 98 AHF engine and i have a doubt.
In basic settings, under group000 i have the timing spot on blue line and moving around it (changing for spot dead on and within spec slightly retarded).
When i see group004(measure blocks):
rpm - 903 / specified start - 1.3ºBTDC / actual start - 1.3ºBTDC / cold start valve - 76.9%
Reading values on warm engine, coolant temp in 88º on vagcom. I read in few DIY that the cold start solenoide should be =<10% when ip timing its ok.
Do i have any problem?no errors on vagcom, didnt see any report on my car. just remeber to play with vagcom and see the values/DIY and see this
Last edited by mrvf; 03-20-2011 at 02:27 AM.