I make up a mixture of Never-size, with ATF and synthetic 90 w gear oil to a thin paste, I have 2 inch brush and a 3/8 wide brush and use is on most everything. It even works on the wheel hubs to the disc's/brake drums and the Aluminum wheel rims to the disc it stops the corrosion and allows for better heat transfer.
If you have to assemble "O" rings that are hard to get together try a little Synthetic gear oil.
I use Move-it penetrating oil, because I got it cheap, seems to do the job, sometimes a little vibration with an air hammer does wonders.
|